Tips & Tricks - Ensuring A Flawless New Shower Unit Installation

Book Today!



Every person may have their private theory when it comes to How to Install a Shower Enclosure .


How to Install a Direct-to-Stud Shower Enclosure
A successful shower setup requires mindful preparation as well as a lot of work. In most cases, you will certainly require to do 3 kinds of tasks: framing walls, installing the plumbing, and also ending up wall surfaces.

Prep work


To start with, you have to select the kind of shower that you wish to install. It is important to identify whether the picked shower is capable of dealing with certain systems and also can control a risk-free level of water through the central heating boiler. Many shower units nowadays are made to be flexible to different water stress (such as kept hot water and chilly mains).
It is additionally vital to consider the water pressure and also the preparation of the piping and drainage for the shower

Various Types of Shower Units


  • Push-on Mixer: The tube and also spray parts of the push-on mixer shower system can be connected to the bathroom tap based on your demand, and the water temperature can be adjusted by means of the taps. Push-on mixers are cheap as well as very easy to set up. Nevertheless, although the hose link is basic, it is conveniently dislodged. Furthermore, it is bothersome to change the temperature.

  • Bath/Shower Mixer: The tube as well as spray of this type of shower are incorporated with a bath mixer tap, and the temperature level can be changed with the bath faucets. It is a very economical option and also no extra plumbing is involved. Nevertheless, the bath/shower mixers also deal with troublesome temperature level control options.

  • Guidebook Mixer: The pipe as well as spray of a hand-operated mixer shower unit are a part of the wall device and the cold and hot water supplies are attached to a single shutoff The temperature level and pressure of the water are controlled via either one or a variety of handles (in more expensive showers). Although temperature level control is much easier in hands-on mixer kinds, they are more costly than the formerly discussed mixers. They also need added plumbing of hot and cold supply of water pipelines.

  • Thermostatic Mixer: The hose pipe as well as spray of this shower type belong of the wall device and the hot and cold water products are connected to a single shutoff below too. It is total with an integrated stabiliser to self-adjust the water temperature and to avoid it from coming to be too hot. Among the largest benefits of a thermostatic mixer shower type includes practical temperature level control. Nonetheless, it is the most costly of the different mixer options.

  • Power Shower: A power shower is a single system consisting of an effective electrical pump that is capable of altering both the water pressure and temperature. This kind of shower can be fitted if there is water system from a cold water tank and also a hot water cylinder. A power shower makes the adjustment of both pressure and temperature simple. On the other hand, it disagrees for water heated up directly by the shower or where the water is supplied by a mix boiler under mains stress.

  • Electric Shower: An electric shower is plumbed into a mains cold water supply and it heats the water electrically. It is very important to keep in mind that for this shower kind to be mounted, the keys stress requires to be at the very least 0.7 kg/sq centimeters (10lb/sq in). The device permits the temperature level and also stress to be readjusted using a handle. Designs with temperature stabilisers are much better as they continue to be untouched by other taps elsewhere in use within the household. A major downside of electrical showers is that the control handle only allows for the alternative of heats at much less stress, or reduced temperature levels at a higher pressure. This is troublesome in the winter season when the spray is frequently weak and the mains water is cooler. Nevertheless, this issue is dealt with in some designs which are offered with a winter/summer setup.


  • Technique


    Depending upon the type of shower you wish to mount, the shower head have to either be suited order to avoid its contact with the water in the bath below or the base tray, or it has to have a check shutoff.
    Before starting, it is advisable to note the settings of the shower head and control, as well as to plan the pipe-work entailed. In addition, the drain system to remove the drainage will need to be intended. Both settings of the cable course as well as the shower switch will certainly likewise require to be thought about if an instantaneous or electrical shower system is being installed.
    Make use of the direction guide given with the shower device to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is essential to remove the water system. In order to shield the pipelines, they should be offered a water resistant covering and additionally fitted with isolating shutoffs. The pipes can then be buried right into the wall surface as well as glued over to neaten the general appearance.
    Fit the base tray, shower head, and also fittings.
    Attach the main shower control to the pipelines that will be supplying the water (This may call for a women screw thread adapter).
    Reconnect the supply of water as well as test the pipelines for any type of leakages, as some may require tightening up.
    If you are setting up an electrical shower, keep in mind to switch off the power supply before making any type of electric connections. As soon as these connections have actually been made (there should be support within the user's manual), the power supply can be changed back on.

    Readjusting Water Pressure to Fit Your Shower


    The cold water reservoir can be lifted to a better height (often just 150mm (6inches)) by fitting a solid wood support underneath it - possibly composed of struts and also blockboards. If you choose this choice, the major and distribution pipelines will certainly also have to be increased to fulfill the brand-new height of the tank.
    Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it has to be connected into the power supply in order to run.

    Piping and also Drainage


    It is best to utilize 15mm size supply pipelines, and make the runs to the shower as brief and also straight as possible so as to preserve optimal stress and also minimise heat loss. Furthermore, by reducing the use of elbow joints for pipeline edges, you can decrease the resistance in the flow of the supply of water. You can attain this by flexing the pipelines instead.

    Many Common Errors


  • Breaching or overlooking neighborhood code restrictions.

  • Using pipes that are as well little.

  • Affixing copper to galvanized without utilizing a brass or dielectric suitable in between both.

  • Not making use of tape or pipeline compound at threaded joints.

  • Uneven your components when mounting them.

  • Not mounting an air void loading for components.

  • Reducing supply stub outs also brief to install the shutoff valves onto after the finished wall is in place.

  • Not properly aligning tubing into installations or stop valves. (Forcing the nut onto the compression ring at an angle when the tubes goes to an angle will cause a leakage.).

  • When turning the water back on in your home, always run the outside hose valve or flush your toilets to hemorrhage dust and also air from the lines. This particles can trigger issues in your sink faucets and other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a Direct-to-Stud Shower Enclosure

    I have been very fascinated with How to Install a One-Piece Shower Unit and I hope you enjoyed reading the new post. Sharing is good. Helping people is fun. Thanks a lot for your time. Please pay a visit to our site back soon.




    Schedule Your Service


    Leave a Reply

    Your email address will not be published. Required fields are marked *